Raspberry Pi powered by FLECS

Accelerate Your Automation Projects with Raspberry Pi

Dive into rapid automation with the Raspberry Pi, a FLECS Official Device that ensures you can set up an efficient automation system faster than ever before. Perfect for both beginners and experienced users, the Raspberry Pi serves as a versatile foundation for numerous industrial and personal automation tasks.

Seamless Setup with FLECS

Experience simplicity from the start with a streamlined process that gets your Raspberry Pi running in no time:

Prerequisites

Make sure you have:

• A Raspberry Pi (Raspberry Pi 4 Model B recommended).
• An SD card with a minimum of 16 GB.
• Raspberry Pi OS 10 or higher.

Step 1: Install Raspberry Pi OS

1. Use the Raspberry Pi Imager to prepare your SD card. Download it from the Raspberry Pi website and follow the instructions to flash your SD card.
2. Complete the general configuration to set up your device.

Step 2: Install FLECS

1. Connect your Raspberry Pi to your local network using an Ethernet cable.
2. Power up the device and let it boot.
3. Run this command in the Raspberry Pi’s command line:

Install FLECS for free by just running

curl -fsSL install.flecs.tech | bash

Step 3: Access FLECS

After rebooting:

• Open a web browser and enter the IP address or hostname of your Raspberry Pi. The default address (http://raspberrypi) will direct you to the UI.
• If there's another webserver running, try accessing FLECS UI on port 8080 or 8008.

FLECS Official Device

The Raspberry Pi is a FLECS Official Device. If you want to learn more about verified devices, check out the details about our FLECS Verified Device Program.

FLECS Verified Device Program