Raspberry Pi powered by FLECS

Information

To make it as easy as possible for you to get started, we offer a single line command to install FLECS on the Raspberry Pi.

Our big promise: You will never have set up an automation system as fast as with FLECS.

The following instructions will help you to set up the Raspberry Pi within a few minutes and to take the first steps with FLECS. Enjoy the ride!

Prerequisites

Before you get started you will need:

- A Raspberry Pi (we recommend Raspberry Pi 4 Model B)

- An SD card with at least 16 GB memory

- Raspberry Pi OS 10, or higher

Step 1: Install Raspberry Pi OS using Raspberry Pi Imager

The easiest way to get a Raspberry Pi up and running is to use the Raspberry Pi Imager. Visit the Raspberry Pi site to download it and flash your SD card with it. Follow these instructions before you continue with the next step here. After the Raspberry Pi Imager successfully flashed your SD card and you finished the general configuration, you are ready to install FLECS now.

Step 2: Install FLECS

To proceed be sure to

- Connect the Raspberry Pi to your local network with a network cable.

- Connect the Raspberry Pi to the power supply and let it boot.

Enter the following command into the command line of your Raspberry Pi:
[vc_cta h2="Install FLECS for free by just running" style="flat" color="black"]

curl -fsSL install.flecs.tech | bash

[/vc_cta]
Step 3: Use FLECS

After your Raspberry Pi has rebooted, you can access the FLECS UI by just entering the ip address, or hostname of your Raspberry Pi in your browser. If you have not changed the hostname, then http://raspberrypi will take you directly to it.

If there is already another webserver running on this system, try to append port :8080 or port :8008

FLECS Official Device

The Raspberry Pi is a FLECS Official Device. If you want to learn more about verified devices, check out the details about our FLECS Verified Device Program.

FLECS Verified Device Program