Revolution Pi powered by FLECS
Here you can learn how to install FLECS on a Revolution Pi in just a few minutes.
Just read and follow the installation instructions in the description below.
To make it as easy as possible for you to get started, we offer a single line command to install FLECS on the Revolution Pi.
Our big promise: You will never have set up an automation system as fast as with FLECS.
The following instructions will help you to set up the Raspberry Pi within a few minutes and to take the first steps with FLECS. Enjoy the ride!
Before you get started you will need:
- A Revolution Pi (we recommend 8GB or more)
- Raspberry Pi OS 10, or higher
Step 1: Install FLECS
To proceed be sure to
- Connect the Revolution Pi to your local network with a network cable.
- Connect the Revolution Pi to the power supply and let it boot.
Enter the following command into the command line of your Revolution Pi:
[vc_cta h2="Install FLECS for free by just running" style="flat" color="black"]
curl -fsSL install.flecs.tech | bash
Step 2: Use FLECS
After your Revolution Pi has rebooted, you can access the FLECS UI by just entering the ip address, or hostname of your Revolution Pi followed by the port 8080 in your browser.
- No ratings found yet!